UQS3001丨 30‘’

Trae instrucciones ??tiles para la instalaci??n.

??Replaced a GE Profile over-the-range microwave/hood combo with this unit after the GE repeatedly failed and became choked with grease. It never really had great suction. Decided we needed the combo of a better hood and a small countertop microwave in our small kitchen. This new Fotile hood does the job. Build quality is excellent and the installation manual was adequate. The only negative - the printing was rotated on the cardboard template (IE not square- off by a 1/4 inch one end of the template to the other), though the all important mounting holes were in the right place. Took a bit of unnecessary hassle to realize this and install the unit. Once installed, it works like a charm. Very, very quiet and powerful and perhaps better that a much larger Vent-a-Hood we had in a previous kitchen. One issue with my installation - it?€?s clear you need a large diameter duct to get the best performance. I stepped our?€?s down to 4 inches from the 7 inch outlet on the hood, and that created a lot of noise. Still, it?€?s way better than what we had before. 5 stars overall, though they need to fix that template.

Like it.

it's just works great

Product works well as advertised. Good design and low suction noise levels were key points for purchasing this range hood. This unit recommends a 7?€? vent outlet - so it needed bit of additional work for the contractor that installed it for me to redo the existing vent that was 6?€?. One minor thing that didn?€?t work well for me is the daylight LED lights that came with the unit, which didn?€?t gel well with the soft white I have in the kitchen. I have not reached out to the manufacturer to check if I can change the LED lights but it is not a pressing matter. Anyway, one week since it was installEd and very satisfied with the purchase - no more lingering cooking smell in the house.

I installed this as a replacement to a previous unit that has a vertical duct. Lessons Learned: 1- The stencil should not be separated (wall and ceiling stencil). Your measurements will be short if you separate the two and then stencil onto the wall and cabinet. 2- If you have a rigid vertical duct you need a coupling or the ability to crimp the existing vertical stack to get it to fit into the boot on the hood. 3- This unit comes with a 3 prong plug, so if you don't already have the electrical for that you will need to install an outlet inside the cabinet above the unit to provide power to it. 4-The light provided by this unit is lower than I would really like. 5- Use 2 cabinet jacks or car jacks to lift the unit into place, it weighs 65 pounds and is awkward to stretch to keep the unit lifted during installation. You will need to place plywood on your stove, then as many large flat objects as you need followed, followed by the jack stand(s), ply wood, and then the unit. Then you lift the unit into place and can get it hooked onto the rear wall brackets, and secured the 3 points at the top of the unit. You need to budget 1-2 days for installation if this is the first time.

I love this product as I always do. This is famous brand in China. And I do believe this brand. so I try my best to get this brand.this product work very well. quiet. And strong power

Very good quality??? I love this!

Would have been amazing if I knew what the mounting looked like before hand. Did not fit into my space. Returned.

Check out my photos. It can get most of the smoke. Plus it is quiet. Love it so far.